Room 101, No. 4, Qianlong Road, Shuibei Industrial Zone, Shipai Town, Dongguan City, Guangdong Province, China

ZHENGFEI ELC-01 manual hot stamping machine for leather branding, 0.01mm precision, digital temperature control.

ZHENGFEI ELC-01 hot stamping machine with dual-handle heating head for leather embossing and branding.

Rear view of ZHENGFEI ELC-01 hot stamping machine with power port, safety switch for commercial workshop use.

Side view of ZHENGFEI ELC-01 hot stamping machine with sliding worktable for flexible leather branding.

ZHENGFEI ELC-01 stainless steel worktable with cross scale for accurate leather stamping positioning.

Close-up of ZHENGFEI ELC-01 red laser positioning module for zero-error hot stamping alignment.

ZHENGFEI ELC-01 hot stamping machine with custom brass mold installed for professional leather branding.

ELC-01 Manual Hot Stamping Machine with Oak Base

29 People Are Viewing This Right Product

The ZHENGFEI WT-90XTS is a professional-grade manual hot stamping machine designed for leather crafting, bookbinding, wood branding, and DIY projects. Featuring a robust C-frame construction, digital temperature control, and precision grid worktable, this machine delivers consistent, professional results for both hobbyists and small businesses.

Category: Machines Tags: Hot Stamping Machine, Manual Hot Stamping Machine, Manual Hot Stamping Machine with Walnut Base Brand: ZHENGFEI

Description

Key Features

Natural Oak Wood Base: Durable, beautiful, and eco-friendly
Red Laser Positioning Module: Pinpoint accuracy for custom placement
Stainless Steel Worktable: Corrosion-resistant with precision measurement scale
Sliding Worktable: Adjust position forward/backward for optimal access
Brass Letter Mold Holder Fixture: Compatible with letterpress and custom brass stamps
Dual Handle Design: Ergonomic lever for comfortable operation

Technical Specifications

Parameter	Specification
Model	ELC-01
Heating Plate	Customizable size
Temperature Range	50-350°C
Voltage	110V/220V (50/60Hz)
Operation	Manual lever press
Worktable Material	Stainless steel with scale
Base Material	Natural oak wood
Special Feature	Red laser positioning

Ideal For

Custom brass mold installations
Letterpress stamping projects
Multi-font text branding
Leather goods personalization
Artisan craft production

Maintenance & Care

Daily Maintenance:

Allow heating plate to cool completely before cleaning
Wipe brass molds with soft cloth to remove foil residue
Clean worktable grid with brush or compressed air
Check all bolts and screws for tightness

Weekly Maintenance (for heavy use):

Clean heating plate with brass brush (when cool)
Apply small amount of heat-resistant lubricant to lever pivot points
Inspect power cord for damage or wear
Verify temperature accuracy with IR thermometer

Long-term Storage:

Store in dry environment to prevent rust
Cover with cloth to prevent dust accumulation
Store brass molds in sealed container with desiccant
Disconnect power when not in use for extended periods

Troubleshooting:

Problem	Possible Cause	Solution
Foil won’t stick	Temperature too low	Increase temp by 10-20°C
Foil sticks everywhere	Temperature too high	Decrease temp by 10-20°C
Uneven impression	Uneven pressure	Check mold is level, apply even handle pressure
Slow heating	Voltage issue or element aging	Check power supply, contact support if persists
Foil tears during removal	Removed too quickly/hot	Wait 1-2 seconds before removing foil

Not Sure If This Fits Your Workshop?

Get in touch with us now

Every craft has its nuances. Tell us about your primary medium—whether it’s vegetable-tanned leather, porcelain, or lost-wax casting—and our master artisan will reply within 24 hours with specific pressure techniques and compatibility advice. No obligation, just expertise.