Para que tus proyectos artesanales pasen de ser de "aficionado" a "profesional", a menudo todo se reduce a un detalle: Marca de precisiónYa sea que estés estampando el nombre de un cliente en una cartera de cuero o grabando un logotipo en una caja de madera, el acabado debe ser perfecto.
Nuestro Sellos de letras de latón intercambiables Te permite lograr una apariencia nítida y profesional con la flexibilidad de modificar el texto al instante. Veamos cómo puedes usar esta herramienta versátil para potenciar la identidad de tu marca.
A WT-QY300 test compared four temperatures for 3D embossed foil stamping on glossy cardstock. 140°C gave the cleanest, most complete result in this specific test.
In a WT-QY300 test with a 5 × 19 cm die, 90°C gave the best balance of foil transfer and soft PVC surface condition among the three settings.
A WT-90DS test compared three temperatures for branding thin wood. 290°C gave the clearest balanced mark, while 350°C caused severe charring.
A controlled WT-90SK test compared four temperatures on glossy cardstock. The cleanest complete transfer came at 110°C under the tested conditions.
ZHENGFEI compared 80°C, 100°C, and 120°C on a pencil surface using the EC-27 and a 3 mm-high letter die. The 100°C sample gave the best balance of clear lettering, even foil, and a stable pencil coating.
An EC-27 test on vegetable-tanned leather compared foil transfer at 90°C, 100°C, and 120°C. The 100°C sample had the clearest, most even result; 90°C left incomplete letters, while 120°C caused foil to spread beyond the letter edges.
A deeper EC-27 temperature test for paper napkin foil stamping, using real image results to compare 90°C, 100°C, 110°C, and 120°C.
A practical temperature test for large-area leather 3D embossing on the YTJ-5T hydraulic hot stamping press, with the cleanest result at 110°C.
We tested 3D embossed foil stamping on paper with a 3T pneumatic hydraulic hot stamping machine and a 3D relief die at 90°C, 100°C, 110°C, and 120°C. The best result came at 110°C for 2 seconds, with full foil transfer, clear relief depth, sharp edges, strong metallic gloss, and lower risk of paper damage.
We tested hot foil stamping on ABS plastic with a TJ8020PS hot stamping machine and silicone mold at 170°C, 180°C, 190°C, and 200°C. The best result came at 190°C for 1 second, with stable foil transfer, clear edges, good metallic gloss, and lower risk of ABS surface softening or deformation.
We tested hot foil stamping on PMMA acrylic sheet with a TJ8020PS machine and silicone mold at 170°C, 180°C, 190°C, and 200°C. The 190°C setting produced the best balance of complete foil transfer, sharp edges, clear details, even metallic gloss, and lower risk of acrylic softening or deformation.
In this TJ8020PS hot stamping test, pearl paper envelopes were tested at 90°C, 100°C, 110°C, and 120°C. The best result came at 110°C, with clean foil transfer, sharp edges, stable adhesion, and minimal paper deformation.
English English
Japanese
Spanish
French
Korean
German
Russian
